RECOMMENDED
PRODUCTS
Full-series slurry pumps & wear parts, 600t/m capacity, custom solutions.
ZH Series Slurry Pumps
The ZH series slurry pumps are horizontal, cantilever centrifugal
pumps designed for handling highly abrasive, high-concentration slurries in the metallurgical, mining, coal, power, and
building materials industries. The pumps can be installed in
series for multistage operation. The pump casing is fitted with
replaceable metal or rubber liners, and the impeller is available
in wear-resistant metal or rubber. Shaft seal options include
packing seals and centrifugal seals.
Caliber: 25-500 mm
Flow rate: 4-5400 m³/h
Head: 5-70 m
ZHM & ZHL Series Slurry Pumps
The ZHM/ZHL series slurry pumps are single-stage, single-suction,
cantilever, horizontal centrifugal slurry pumps designed for
handling moderately to mildly abrasive slurries in the metallurgical,
power, chemical, mining, paper, and building materials industries.
These pumps are primarily designed for high-flow, low-concentration, low-head applications. At low speeds, they can also handle
high-concentration, highly abrasive slurries. Compared with ZH
series pumps of the same discharge size, they are more compact,
lighter, and more cost-effective.
Caliber: 20-350 mm
Flow rate: 2-2850 m³/h
Head: 3-60 m
ZHH Series High Head Slurry Pumps
The ZHH series slurry pumps are single-stage, single-suction,
cantilever, double-casing centrifugal slurry pumps designed for
handling highly abrasive slurries in the metallurgical, power, chemical, mining, paper, and building materials industries. They can handle
low-concentration, high-head duties as well as high-concentration,
low-abrasion duties, delivering fluids at heads beyond the capabilities
of conventional single-stage pumps.
Caliber: 25-150 mm
Flow rate: 16-720 m³/h
Head: 12-118 m
ZG Series Gravel Pumps
The ZG/ZGH series slurry pumps are single-stage, single-suction,
single-casing, cantilever horizontal centrifugal slurry pumps. They are
capable of handling large, highly abrasive solids that conventional
slurry pumps cannot readily handle. Applications include heavy-media
transfer in coal preparation, dredging aboard dredgers, river dredging, transfer of mining and smelting waste, and handling of root and
tuber materials. They are particularly suitable for high-flow, high-concentration, high-head duties.
Passable particle size: 30 mm-150 mm
Caliber: 100-400 mm
Flow rate: 36-3168 m³/h
Head: 5-80 m
ZC Series Slurry Pumps
The ZC series mill circuit slurry pumps are specifically designed
for demanding operating conditions, delivering long wear life and
reliable operation. They can handle high-density, abrasive slurries
containing large particles. With robust construction and an
excellent combination of hydraulic design and materials, they are
a preferred choice for challenging applications such as mill
discharge and crusher washdown.
Caliber: 125-750 mm
Flow rate: 120-18000 m³/h
Head: 5-55 m
ZP Series Submerged Slurry Pumps
The ZP series slurry pumps are single-stage, cantilever vertical
sump slurry pumps designed to handle highly abrasive, high-concentration slurries containing coarse particles. They require no shaft
seal water and can operate reliably even with insufficient suction
supply. They are widely used for sump pumping applications in
mining and coal preparation systems.
Caliber: 40-300 mm
Flow rate: 17-1267 m³/h
Head: 4-40 m
ZHQ Series Submersible Slurry Pumps
ZHQ series submersible slurry pumps feature an integrated motor and pump structure for direct submerged operation. They are designed to convey abrasive slurries containing solid particles such as silt, ore sand, tailings and coal slime. Compact and space-saving, the pumps are easy to hoist and arrange on site, suitable for slurry pumping and sediment cleaning in tailings ponds, settling tanks, sumps and dredging sites. Models can be selected based on flow rate, head, particle size, slurry concentration and submergence depth to meet conveying requirements of different working sites.
Caliber: 50-300 mm
Flow rate: 10-2000 m³/h
Head: 7-700 m
Grinding Ball
Wear-resistant steel balls are the core grinding media for ball mills. They cover high-chromium cast balls, medium-chromium cast balls, low-chromium cast balls and forged steel balls, featuring high hardness, good impact toughness and low wear rate. Suitable for material grinding applications such as mineral beneficiation, cement plants and power plant fly ash, they are widely used in wet and dry ball milling operations. This series has a complete range of specifications with customizable materials. With good roundness and low breakage rate, they can be flexibly selected according to mill size, feed particle size and target grinding fineness to meet various powder grinding production requirements.
Diameter: 10mm–130mm
Mill Liner
Mill liners are core wear-resistant components for ball mills and crushers. They include high manganese steel liners, high-chromium alloy liners and other types, featuring good impact resistance, excellent wear resistance and low fracture tendency. Suitable for grinding and crushing applications such as mineral beneficiation, cement production and power plant fly ash processing, they are widely used for equipment protection in wet ball milling, dry ball milling and crushing operations. This series has a complete range of sizes and profiles with materials available on request. They can be flexibly selected according to mill model, material hardness and impact load, and used together with wear-resistant steel balls to meet various production requirements for powder grinding and crushing.
Customized
Motor
Electric motors are power drive components for various pumps and mill equipment. This series covers general-purpose, explosion-proof and variable-frequency three-phase asynchronous motors, featuring stable operation, sufficient torque and excellent energy efficiency. Suitable for working conditions including mining, chemical industry, sewage treatment and water supply, they are widely matched with slurry pumps, centrifugal pumps and other equipment. This series adopts proven stator and rotor manufacturing technology with a full range of protection grades and reliable insulation performance. It offers a wide power range. Motors can be flexibly selected according to equipment load, power supply environment and explosion-proof requirements to meet the demands of equipment driving and long-term continuous operation.
High Efficiency Level
Explosion-Proof Option
Low Noise
Liner Plate
Slurry pump liner plates are core wear-resistant wetted components of slurry pumps, including front liner plates and rear liner plates. They are made of high-chromium wear-resistant alloy and feature excellent erosion and abrasion resistance. Suitable for conveying solid-laden media such as slurry, tailings and sewage, they work together with impellers and pump casings to protect the pump cavity from erosion. This series adopts proven casting and heat treatment processes with precise structural dimensions to guarantee proper operating clearance. A complete range of specifications is available for selection according to pump models, and custom production against drawings is supported to meet the requirements of slurry pump assembly and spare part replacement & maintenance.
High-Chrome Wear Plate
Protects Casing & Impeller
Impact Resistant
Seal
Primarily used to reduce fluid leakage along the pump shaft, these shaft seals can be configured with suitable designs and materials for slurry, sewage, clean water, and mildly corrosive media in slurry pumps, centrifugal pumps, and other equipment. Selection is based on fluid characteristics, temperature, pressure, and rotational speed. Products can be matched to pump models and installation dimensions, with customization available to meet shaft sealing requirements under various operating conditions.
Single / Double Seal
Leak-Free
Long Seal Life
Impeller
Impellers are core wetted components of slurry pumps and centrifugal pumps, including closed, semi-open and open types. They are available in high-chromium wear-resistant alloy, ductile iron and other materials, featuring high hydraulic efficiency, good erosion and wear resistance. Suitable for conveying slurry, tailings, sewage, clean water and mildly corrosive media, they work together with pump casings and liner plates. They pressurize and transport media through rotation. This series adopts proven casting and heat treatment processes with precisely formed flow passages and qualified dynamic balance. A complete range of specifications is available for selection according to pump models, and custom production against drawings is supported to meet the requirements of pump assembly and spare part replacement & maintenance.
High-Chrome / Rubber
Closed or Open Type
High Efficiency
Shaft Sleeve
Sleeves are core shaft protection parts for slurry pumps and centrifugal pumps. They are available in stainless steel, high-chromium alloy and other materials, featuring high hardness, wear resistance and corrosion resistance. Suitable for conveying slurry, tailings, sewage, clean water and mildly corrosive media, they are fitted outside the pump shaft to isolate the medium and protect the pump shaft from erosion and abrasion. This series adopts precision machining technology with high dimensional accuracy and good concentricity. A complete range of specifications is available for selection according to pump models, and custom production against drawings is supported to meet the requirements of pump assembly and spare part replacement & maintenance.
Wear Resistant
Precision Machined
Butterfly Valves
Butterfly valves are widely used regulating and shut-off valves for pipeline systems. They are available in ductile iron, stainless steel and other materials, featuring compact structure, quick opening and closing, and low operating torque. Suitable for conveying clean water, sewage and mildly corrosive media, they are widely applied in water supply, water treatment, chemical, mining and other pipelines to control medium cut-off and flow rate. This series adopts proven casting and machining processes with stable sealing performance. A complete range of specifications is available for selection according to pipeline conditions, and custom production is supported to meet the requirements of pipeline installation and spare part replacement & maintenance.
Nominal Diameter: DN15-DN1200
Y-Type Strainer
The Y-type strainer is a pipeline device designed to intercept solid impurities. It uses a built-in stainless steel filter to trap particles, effectively protecting pumps, valves, and instruments. The valve body is offered in ductile iron, carbon steel, or stainless steel, with customizable mesh accuracy and materials to suit different media.It is widely used in water supply, water treatment, HVAC, chemical, and industrial systems, handling water, oil, steam, and various corrosive liquids and gases. Options are available based on pipe diameter, pressure, temperature, end connection, and installation orientation, including non-standard customization. The filter mesh is easily removable for cleaning, ensuring convenient long-term maintenance.
Nominal Diameter: DN15-DN1200
Gate Valves
Gate valves are commonly used on-off valves for pipeline systems. They are available in ductile iron, stainless steel and other materials, featuring straight flow passages, low flow resistance and stable sealing performance. Suitable for conveying clean water, sewage and mildly corrosive media, they are widely applied in water supply, water treatment, chemical, mining and other pipelines to control medium on and off. This series adopts proven casting and machining processes with moderate opening and closing torque. A complete range of specifications is available for selection according to pipeline conditions, and custom production is supported to meet the requirements of pipeline installation and spare part replacement & maintenance.
Nominal Diameter: DN15-DN1200
Check Valves
Check valves are automatic valves designed to prevent reverse flow in pipelines, with common designs including lift, axial-flow, and swing types. Valve bodies are available in ductile iron or stainless steel, with internal components and sealing materials selected according to fluid characteristics. Suitable applications include water supply, water treatment, chemical processing, and mine water supply and drainage systems. Compatibility with clean water, wastewater, mildly corrosive fluids, or particle-containing media depends on valve design and materials. Various sizes and customization options are available to suit operating conditions, installation requirements, and maintenance and replacement needs.
Nominal Diameter: DN15-DN1200
APPLICATION
AREAS
Proven solutions for mining, FGD, dredging, tunneling & water treatment.
ABOUT
Zhonghui Yinglian
Established In 2005
Factory Floor Area
Revenue of 300 million in 2025
Tianjin Zhonghui Yinglian Mechanical Equipment Co., Ltd.
Founded in 2005, Tianjin Zhonghui Yinglian Mechanical Equipment Co., Ltd. is affiliated to Tianjin Zhonghui Yinglian Group and specializes in the manufacturing and export of slurry pumps and wear-resistant accessories. The group has 200+ employees, of which technical personnel account for 40%+. Our products are sold to 50+ countries and regions across 5 continents, serving 500+ customers with 4 overseas warehouses deployed, and the group’s revenue 300+ million in 2025. With a 200,000m² production base and 600t/month capacity, we serve mining, water treatment, FGD, dredging, and tunneling — providing one-stop solutions and full life-cycle service.
OUR
BLOG
Latest industry insights, company updates, and global market trends.
2026-09-14
28th China Mining Conference and Exhibition 2026
2026-04-13
2025-12-10
What are the differences between closed impellers, semi-open impellers, and open impellers?
2025-10-13
Pump Industry Development Trend Analysis
CONTACT
US
Global sales network, timely support, and responsive service.
Quick Quote
OEM/ODM Service available
Fast Lead Time
Reliable Quality
Zhonghui Yinglian
Tel:+86-22-61178968
E-mail: info@zhpump.com
Address: Tongguang Technology Park, No. 185 Xinda Road. Hebei District. Tianiin, China
Angela Hu:
Michael Xie:
Amy Fu:
Aria Zhi:
E-mail:
Telephone:
导航下拉添加类名.active
在线客服添加返回顶部
右侧在线客服样式 1,2,3 4
图片alt标题设置: Tianjin Zhonghui Yinglian Mechanical Equipment Co., Ltd.
表单验证提示文本: Content cannot be empty!
循环体没有内容时: Sorry,no matching items were found.
CSS / JS 文件放置地